An enhancement of double pipe heat exchanger performance at a constant wall temperature using a nanofluid of iron oxide and refrigerant vapor
1Department of Mechanical Engineering, University of Technology - Iraq, Baghdad, Iraq
J Ther Eng 2024; 10(1): 78-87 DOI: 10.18186/thermal.1429191
Full Text PDF

Abstract

This study reports on experimentally enhancing the performance of a concentric double pipe heat exchanger using nanofluid and refrigerant vapor under constant wall temperature con-ditions. Ferro-nanoparticles with diameters of 80 nm are distributed in distilled water with volume concentrations of 0.1-0.7 % (nanofluid), which is used as hot fluid flowing turbulently inside the inner tube with Reynolds numbers ranging from 3900 to 11800, while refrigerant vapor produced from the refrigeration unit is used as cold fluid with counterflow through the annular tube. The results show that the convection heat transfer coefficient and Nusselt number in the inner tube increase proportionally with a rise in the mass flow rate of nanofluid and the ratio of nanoparticles in the fluid (concentration). Under Reynolds number 11900, the maximum enhancement for convection heat transfer coefficient and Nusselt number in the inner tube was 13.4% and 10.7%, respectively, when using the iron oxide nanofluid with volume concentration of 0.7% compared to pure water. The results of the test were also com-pared with an almost similar study that used water in the annular tube, and it was found that the use of refrigerant vapor in the annular tube gives better performance compared to water.